3M Controltac Plus Graphic Film Series 3500C

Use this 4 mil, opaque vinyl film to screen print a variety of durable, yet changeable interior and exterior graphics. Applications include bus graphics, commercial vehicle or fleet graphics, emblems or striping, mass transit interior advertising, point-of-purchase or trade show displays, interior or exterior graphics and signs, vending or dispensing machine and cooler graphics. This is a white film with gray adhesive and a matte finish.

Installation of large graphics is easy with the comply performance feature of this film. This is a mechanical feature that allows air to travel through the adhesive, so there are usually fewer air bubbles. The pressure-activated adhesive allows the film to be repositioned during installation until pressure is applied to the film surface.

This graphic film applies well to flat surfaces, with or without rivets. Appropriate substrates include glass, metal, paint or rigid plastic. Within the right temperature range, the film can be removed within two years without use of accessories or chemicals.

When used according to written instructions, graphics made with this film are covered by the 3M MCS Warranty - the most comprehensive warranty in the industry.

3M Controltac Plus Graphic Film Series 3500C Product Bulletin-
To navigate, click on the right side of the image to advance, and the left side to go back
  • 3M 3500C Product Bulletin 1
  • 3M 3500C Product Bulletin 2
  • 3M 3500C Product Bulletin 3
  • 3M 3500C Product Bulletin 4
  • 3M 3500C Product Bulletin 5
  • 3M 3500C Product Bulletin 6
  • 3M 3500C Product Bulletin 7